10 sec 351w Complete

[knickel]

351 .40 over all balanced and blueprinted
J&E forged pistons 10.5 to 1 comp
Eagle h beams rods
All ARP hardware
Federal Mogul P series bearings
Stock stroke crankshaft turning .20 .10
Summit racing 28 oz SFI balancer
Trick Flow main girdle
Melling HV oil pump, and HD oil pump shaft
Solid flat tappet camshaft 584, 610 lift 110 lobe separation
Eledbrock VIC Jr heads 2.05 1.60 valves with comp cams triple valve springs
Trick flow hardened push rods
Comp Cams guide plates
Scorpion 1.6 roller rockers
Moroso Electric water pump
March serp electric water pump pulley kit
Quick fuel 4150 hp series 780 cfm carb
Victor JR intake ports matched to heads and show polished on exterior
Comp Cams Double roller timing chain with 3 way keyway
Coast High performance Oil pan 7 qt
Mac 1 3/4 full length headers
3 in exhaust to dynomax race mufflers
MSD Billet dist.

$4500

Motor went 10.80's with a soft tune in a 89 LX 3000lb.

[knickel]

$4000 lets deal

[jbigbootsy]

4 g's is pretty good. How hard has it been beat on? Everything turn OK on it? Knocks, smoke, anything bad?

[knickel]

All thats left is the short block. The rest has been parted out. I'm looking for $1600 for the short block.