PDA

View Full Version : can someone help?

chrisdottore
07-12-2006, 09:09 PM
does anyone know how to wire a air shifter up on a motorcycle?
terr1bleone
07-12-2006, 10:17 PM
what company air shifter did you get?
chrisdottore
07-12-2006, 10:35 PM
pingle
Jason Hart
07-12-2006, 10:39 PM
does anyone know how to wire a air shifter up on a motorcycle?

If you are using a horn button for the activation wire it using a relay, send the power to the horn when the power to the relay is off & to the air solonoid when relay is hot. You will need a toggle switch to arm the relay. Hard to explain on computor but hope this helps.
terr1bleone
07-13-2006, 01:44 AM
I think needs to wire to an activation 12v ignition, then the blue wire needs to be grounded to activate the kill. This can be done thru a button. or you could run a relay, if for example you wanted to autoshift. i never wired a pingle only mps so sorry. i may not be making any sence so bear with me.
NotDads
07-13-2006, 10:58 AM
Chris check here: http://www.pingelonline.com/index.htm
Jason Hart
07-13-2006, 06:17 PM
If you run it through the relay like I explained the horn button will still work the horn when the air shifter is not armed.
chrisdottore
07-13-2006, 08:59 PM
it dont need a horn on it
Jason Hart
07-13-2006, 09:24 PM
Id still run it with a relay. Have you ever wired a nitrous system? basicly the same thing.
chrisdottore
07-14-2006, 10:49 AM
no i havent, thats will be the next thing i get for it