Spool on the Street

[Newbomb]

Any comments?

[aquick68]

just do it

[Newbomb]

Do Strange spools require C-clip eliminators?

[spdracr]

Do Strange spools require C-clip eliminators?
:yup:

[GETDUSTED]

Never Had A Problem With One.....but You Might Since You Don't Have Enuff Horsepower To Help The Tires Turn Around A Corner

[ZODIAC]

Do Strange spools require C-clip eliminators?


YES THEY DOOO... I HAVE ASTRANGE SPOOL IN MY 72 CAMARO WITH C CLIP ELIMINTORS..

IF YOU RUN A SPOLL ON THE STREET YOUR TIRES WILL CHIRP WHEN YOU TURN CORNERS:yup:

[Newbomb]

Do ALL spools require the C-clip eliminators?

[spdracr]

Do ALL spools require the C-clip eliminators?
:dunno:
Do you just want a spool because its cheap?

[Newbomb]

Never Had A Problem With One.....but You Might Since You Don't Have Enuff Horsepower To Help The Tires Turn Around A Corner

:think:

[Newbomb]

Yea my posi was going out (last time I drove it :rolleyes:)

Spools are cheaper than the posi unit, but with C-clip eliminators it would be about the same....

[spdracr]

Yea my posi was going out (last time I drove it :rolleyes:)

Spools are cheaper than the posi unit, but with C-clip eliminators it would be about the same....
thats what I was going to tell you. And the first time you break an axle with a spool on the street(I'm guessing you have stock axles) You will be spending even more money.So just buy a decent limited slip and drive worry free.

[Newbomb]

Detriot locker maybe...

First I need floor pans :laughing:

[spdracr]

Detriot locker maybe...

First I need floor pans :laughing:
just put the connecters in the way I explained it to you and you can put the pans in later

[pkracing]

Yea my posi was going out (last time I drove it :rolleyes:)

Spools are cheaper than the posi unit, but with C-clip eliminators it would be about the same....put 9" ends on your rear and no leaky c-clip eliminators(which they always seem to do)

[ratgp]

put 9" ends on your rear and no leaky c-clip eliminators(which they always seem to do)


x2


In my old Grand Prix, I used to do some street cruising (limited to probably less than 500 miles per year) and I used a spool and Moser 31 spline axles with no problems. Street driving in that thing was basicly putting around my small town to get to the outer limits, point it in a relatively straight line and let it eat. Never tried any major corner carving with it. Also if you go the 9" ends route, brakes will be more plenifull as well as axles and brakes being less expensive.

[GMCRACER]

Never Had A Problem With One.....but You Might Since You Don't Have Enuff Horsepower To Help The Tires Turn Around A Corner

http://www.seattlephil.com/images/laughing.gif

[GETDUSTED]

Anytime you want a heads up race Newbomb just let me know and for how much!!!!!!! also I know someone that is selling a 12 bolt for that year camaro, spool, 411 gear, good axel and all,,,,,,

[Newbomb]

Let's go heads up right now....:think:

:rolleyes:

[Jim Morris]

Correct me if i'm wrong, but doesn't strange sell a kit that would have almost everything you need for a good price?

I thought you were going to sell that thing anyway?

[Newbomb]

You thought wrong...:evil:

[Jim Morris]

So your going to keep it now and re-do it, thats good. It would be worth more in the end.

[Newbomb]

Yea...alot more than a certain yellow 1971 Camaro :laughing:

[BigMac1971]

You Only Dream


Dude My Car Appraised For At Least 5g's More Than Your Best Offer 3 Years Ago And Have Done Alot To The Car Since So Whatever Dude.get That Heap Out And Race The Fucking Car Instead Of Typing Like You Have Something For Me.

[Newbomb]

Hey asshole...how old are you? When I'm YOUR age we'll see how much my car is worth....

Anyone have comments on a Mini spool? You can use cclip axles with those...

[BigMac1971]

Hey Your The Asshole Who Keeps Trying To Start Shit





And Dont Waste Your Money On A Mini Spool Junk
The Strange Spool And Axle Pkg Is Like $600bucks Just Spend The Money And Be Done With It

[aquick68]

i agree with mac strange has a kit for basically anything you want to do to that rear end but, getdusted also has a friend with a kick ass 12 bolt and i know he is looking to get rid of it for a really decent price!!!

[GETDUSTED]

Yea Bitch!!!!!

[Jim Morris]

A 12 bolt would be better

[aquick68]

9 inch would be best but that 12 bolt is not to far from it . its a nice piece for the money

[BigMac1971]

A 12 bolt would be better


a 12 bolt would be better but not that much
i got a 10 bolt in my car seems to be holding up just fine :D

honestly if you plan on putting major power down just put a fab9 in it dont want to give the camaro a rash with those ford parts now

[aquick68]

the best and maybe the only thing ford ever did right was the 9 inch

[Jim Morris]

Your right, a 10 bolt wouldn't be bad either. I was thinking about how much money he would have to put into the one he has now compared to the 12 bolt aquick68 says is a decent price. If its a complete rear it would be cheaper.

[aquick68]

absolute bolt in deal

[Jim Morris]

There you go, complete ready to go. You would have atleast a grand into the 10 bolt or whatever you have to be just as good.

[aquick68]

support cover, pro gears, axles ready to go only thing might need is u bolts if bommer fucks them up. and a tube of sealent 4 the cover im sure u want to inspect it

[BigMac1971]

what was the price for the rearend? if it's like a g note it wold be worth it plus a lot of people are obsessed with that on those year cars.

[aquick68]

wating on a call

[aquick68]

what was the price for the rearend? if it's like a g note it wold be worth it plus a lot of people are obsessed with that on those year cars.
shitty thing is they dont fit in our cars or i would have jumped on it

[aquick68]

slapper bars, shocks, springs, shock relocater, 4:11 pro gears, 30 spline strange axles, c clip eliminators (never leaked) and bearings new as of as of spring. 1200.00

[Newbomb]

I don't make enough power for the 12bolt....all I need is to get both tires firing again :)

I'll replace shit as it breaks....I'll just look for an Eaton posi unit...

don't forget my chassis is still impaired ;)

[Newbomb]

and 8.5'' 10 bolts are plenty strong enough...

Right Mac?;)

[BigMac1971]

yeah ed 12 bolts are hard to find for 2nd gen camaros thats why i just did my 10 bolt the car is slow anyway :yup: when i start making some power i was going to go with a fab 9:yup:


newbomb should jump on it not a bad price whole rear suspension with a rear end

then all he needs is frame ties and some floor boards :laughing:

[Newbomb]

All I need is frame ties and rear tires to be driving safely!

But that damn one tire fire sure sucks......so does trying to do a burnout on the icey driveway with tore up slicks :laughing:

I should have made a video!!

[Newbomb]

Also....

http://www.streetcarchaos.net/forums/showthread.php?t=8159

[BigMac1971]

and 8.5'' 10 bolts are plenty strong enough...

Right Mac?;)


if you are broke stay with the 10 bolt if you have a few bucks buy that 12 bolt everyone seems to want 12 bolts in 67-69 camaros

you can build your rear end to be almost as strong as a 12 bolt for about what they are asking for that setup


my 10 bolt seems to work alright you seen the pics and video

[spdracr]

Why don't you just freshen up your posi? Just put some new clutches in it and you won't have to set the rear gear up again. Pop it out, make sure to keep the shims in order, replace the clutches and put the pig back in with the same shims.
DONE!

[BigMac1971]

Why don't you just freshen up your posi? Just put some new clutches in it and you won't have to set the rear gear up again. Pop it out, make sure to keep the shims in order, replace the clutches and put the pig back in with the same shims.
DONE!

that would work too if someone is on a real tight buget

[Newbomb]

:dunno:


You never responded to my PM :cry:

[Newbomb]

My budget is tighter than a tick's ass.....

Six Gun

[aquick68]

wow that sounds like work

[spdracr]

wow that sounds like work
why? If he buys a new posi unit, the gear has to be removed and installed on the posi then the whole thing has to be set for backlash an shimed. THAT sounds like a lot of work, not to mention paying someone to set it, cause I'm sure Newbomb doesn't know how. Rebuilding the existing posi unit is a no brainer. This topic should be over!

Posi unit $450
Shims $30
install $225
total $705


New posi clutches $100
no brainer

[spdracr]

:dunno:


You never responded to my PM :cry:
I got a new phone because you called me all the friggin time!:laughing:
and no you aint gettin my new number

[aquick68]

but he is a student and works too when will he find the time? oh thats right maybe he will take a night or 2 off and give us a break from the site?

[Newbomb]

I got a new phone because you called me all the friggin time!:laughing:
and no you aint gettin my new number

Your new phone doesn't let you respond to PM's? :think:

[spdracr]

but he is a student and works too when will he find the time? oh thats right maybe he will take a night or 2 off and give us a break from the site?
Fat chance. Would be nice though wouldn't it:yup:

[spdracr]

Your new phone doesn't let you respond to PM's? :think:
No dumb shit, that is my response! You couldn't get ahold of me because I got a new work phone so I canceled my personal phone.

[BigMac1971]

No dumb shit, that is my response! You couldn't get ahold of me because I got a new work phone so I canceled my personal phone.
:laughing: :laughing:

[Newbomb]

But I had questions in there for you.....:cry:

[spdracr]

But I had questions in there for you.....:cry:
No I will not make out with you:mad:


And to the other questions;
yes
no
no

[Newbomb]

No I will not make out with you:mad:

:scared:

[Justa396]

Why don't you just freshen up your posi? Just put some new clutches in it and you won't have to set the rear gear up again. Pop it out, make sure to keep the shims in order, replace the clutches and put the pig back in with the same shims.
DONE!
damn! i can't beleive it took 5 pages for someone to come up with the obvious answer, thanks john!! adams got 250 hp at the fly wheel, the 10 bolt is more than enough!:laughing:

[spdracr]

damn! i can't beleive it took 5 pages for someone to come up with the obvious answer, thanks john!! adams got 250 hp at the fly wheel, the 10 bolt is more than enough!:laughing:
:tup: I'll PM you my new numbers if you promise not to give them to Newbomb:laughing:

[ZODIAC]

shitty thing is they dont fit in our cars or i would have jumped on it


You Can Cut the Spring Penchs off and REWELD them:yup: :yup:

[ZODIAC]

My budget is tighter than a tick's ass.....

Six Gun


HEY Newbomb ur budget cannot be as tight as mine is

I am so BROKE I cannot PAY ATTENTION:yup: :cry:

[Newbomb]

:laughing::laughing::laughing::laughing:

[FUK_N_JUNK]

I like Lincoln Lockers....